Tyvek® 500 Boot Covers | Knee-Length | Type PB [6-B] | Pack of 200

The DuPont™ Tyvek® 500 Boot Cover POB0 is a white knee-length overboot with an elastic top and fixation ties to hold it in place, with stitched internal seams. Designed for use alongside Tyvek® apparel, Tyvek® accessories give enhanced protection for body parts that are more exposed to hazardous substances. Tyvek® is made from flash spun high density polyethylene, permeable to air and water vapour yet repelling water-based liquids and aerosols, with an excellent barrier against fine particles and fibres down to 1 micron. Ultra-low-linting and antistatically treated on both sides. Silicon non-added.

Features

• Certified to Regulation (EU) 2016/425

• Partial body chemical protective clothing, Category III, Type PB [6-B]

• EN 14126, barrier to infective agents

• Antistatic treatment to EN 1149-1, on both sides

• Elastic top

• Fixation ties

• Stitched internal seams

• Ultra-low-linting, silicon non-added

Applications

• Pharmaceutical handling

• Chemical protection

• Lead and asbestos abatement and remediation

• General maintenance and operations

• Spray painting and general clean-up

Technical Data

• Fabric: Tyvek®, flash spun HDPE

• Basis weight: 41.5 g/m² (DIN EN ISO 536)

• Melting point: approximately 135°C

• Surface resistance, inside and outside: <2.5 x 10⁹ Ohm (EN 1149-1, 25% RH)

• Type PB 6 partial body protection: pass (EN 13034)

• Seam strength: >50 N (EN ISO 13935-2)

• Resistance to water penetration: >10 kPa (AATCC 127)

• Abrasion resistance: >100 cycles; flex cracking: >100,000 cycles

• Repellency to 10% sodium hydroxide and 30% sulphuric acid: >95% (EN ISO 6530)

Size & Packaging

• One size

• Pack of 200

Unit of Sale

• Pack