DuPont™ Tychem® 2000 C Hooded Coverall | Yellow | Type 3-B to 6-B

DuPont™ Tychem® 2000 C hooded coverall, model CHA5, part number TCCHA5TYL00, in bright yellow for high visibility and sizes SM to 3X. Tychem® 2000 C combines the strength of Tyvek® with a polymeric barrier coating to give a good permeation barrier against a wide range of inorganic chemicals and biological hazards, even under pressure, in a lightweight and durable garment of under 450g. The coverall has stitched and over-taped seams with barrier tape, a self-adhesive double zipper flap closure with pin lock slider, a self-adhesive chin flap for sealing to a mask, a respirator-fit two-piece hood, elasticated face, wrists, waist and ankles, and thumb loops. Antistatically treated on the inside.

Features

• Chemical protective clothing, Category III, Type 3-B, 4-B, 5-B and 6-B

• Certified to Regulation (EU) 2016/425

• EN 14126, barrier to infective agents

• EN 1073-2, protection against radioactive particle contamination

• Antistatic treatment to EN 1149-5, inside only

• Tyvek® strength with a polymeric barrier coating for permeation resistance, even under pressure

• Lightweight and durable, under 450g per garment

• Bright yellow for high visibility

• Stitched and over-taped seams with barrier tape for protection and strength

• Self-adhesive double zipper flap closure with pin lock slider

• Self-adhesive chin flap for a tight seal of suit to mask

• Respirator-fit two-piece hood

• Elasticated face, wrists, waist and ankles

• Thumb loops to prevent sleeves riding up

Applications

• Splash and pressurised splash protection in industrial environments

• Pulp and paper manufacturing

• Food processing

• Chemical processing

• Pharmaceutical manufacturing

Technical Data

• Fabric: Tychem® C

• Basis weight: 83 g/m² (DIN EN ISO 536)

• Thickness: 185 µm (DIN EN ISO 534)

• Surface resistance at 25% RH, inside: <2.5 × 10⁹ Ohm (EN 1149-1). Outside is untreated

• Tensile strength MD and XD: >100 N (DIN EN ISO 13934-1)

• Trapezoidal tear resistance MD and XD: >10 N (EN ISO 9073-4)

• Bursting strength: 500 kPa (ISO 2758)

• Puncture resistance: >10 N (EN 863)

• Seam strength: >125 N (EN ISO 13935-2)

• Abrasion resistance: >1,500 cycles (EN 530 Method 2)

• Flex cracking resistance: >5,000 cycles (EN ISO 7854 Method B)

• Resistance to water penetration: >30 kPa (AATCC 127)

• Air permeability: not air or water vapour permeable (TAPPI T460)

• Nominal protection factor: >5 (EN 1073-2)

• Repellency to o-xylene, butan-1-ol, sodium hydroxide 10% and sulphuric acid 30%: >90% (EN ISO 6530)

• Resistance to penetration by those liquids: <1% (EN ISO 6530)

• Type 3 jet test: pass (EN 17491-3)

• Type 4 high level spray test: pass (EN ISO 17491-4 Method B)

• Type 5 inward leakage of airborne solid particulates: pass (EN ISO 13982-2)

• Type 6 low level spray test: pass (EN ISO 17491-4 Method A)

• Shelf life: 10 years

Size & Packaging

• SM to 3X

• Supplied individually, 25 per box

Unit of Sale

• Each