DuPont™ Tyvek® 500 Labcoat | Press Studs, No Pockets | Type 6-B [PB]

DuPont™ Tyvek® 500 labcoat with press studs, model PL30NP, part number TYPL30SWHNP, in white and sizes MD to 2X. The labcoat has a collar with five press stud closures, no pockets, elasticated cuffs that are not tunnelled and stitched internal seams. Designed for use with Tyvek® apparel, Tyvek® accessories give enhanced protection to body parts that are more exposed to hazardous substances. Made of flash spun high-density polyethylene, Tyvek® is permeable to air and water vapour yet repels water-based liquids and aerosols, gives an excellent barrier against fine particles and fibres down to 1 micron, is ultra-low-linting and is antistatically treated on both sides. Silicone non-added.

Features

• Partial body chemical protective clothing, Category III, Type PB [6-B]

• Certified to Regulation (EU) 2016/425

• EN 14126, barrier to infective agents

• Antistatic treatment to EN 1149-1, applied both sides

• Flash spun high-density polyethylene, ultra-low-linting

• Barrier against fine particles and fibres down to 1 micron

• Permeable to air and water vapour, repels water-based liquids and aerosols

• Collar with five press stud closures

• Without pockets

• Elasticated cuffs, not tunnelled

• Stitched internal seams

• Silicone non-added

Applications

• Pharmaceutical handling

• Chemical protection

• Lead and asbestos abatement and remediation

• General maintenance and operations

• Spray painting and general clean-up

Technical Data

• Fabric: Tyvek® 500, flash spun HDPE

• Basis weight: 41.5 g/m² (DIN EN ISO 536)

• Surface resistance at 25% RH, inside and outside: <2.5 × 10⁹ Ohm (EN 1149-1)

• Tensile strength MD and XD: >60 N (DIN EN ISO 13934-1)

• Trapezoidal tear resistance MD and XD: >10 N (EN ISO 9073-4)

• Puncture resistance: >10 N (EN 863)

• Seam strength: >50 N (EN ISO 13935-2)

• Abrasion resistance: >100 cycles (EN 530 Method 2)

• Flex cracking resistance: >100,000 cycles (EN ISO 7854 Method B)

• Resistance to water penetration: >10 kPa (AATCC 127)

• Air permeability: <45 s, Gurley (TAPPI T460)

• Repellency to sodium hydroxide 10% and sulphuric acid 30%: >95% (EN ISO 6530)

• Resistance to penetration by those liquids: <1% (EN ISO 6530)

• Melting point: approximately 135°C

• Shelf life: 10 years

• Type PB 6 partial body protection: pass (EN 13034)

Size & Packaging

• Medium to XXL

• Supplied individually, 50 per box

Unit of Sale

• Each