Tyvek® 500 Hood | Elasticated Face and Neck | Type PB [6-B] | Pack of 100

The DuPont™ Tyvek® 500 Hood PH30L0 has a wide flange and elastic around the face and neck, with stitched internal seams. The flange tucks under a coverall so the two work together as a system. Designed for use alongside Tyvek® apparel, Tyvek® accessories give enhanced protection for body parts that are more exposed to hazardous substances. Tyvek® is made from flash spun high density polyethylene, permeable to air and water vapour yet repelling water-based liquids and aerosols, with an excellent barrier against fine particles and fibres down to 1 micron. Ultra-low-linting and antistatically treated on both sides. Silicon non-added.

Features

• Certified to Regulation (EU) 2016/425

• Partial body chemical protective clothing, Category III, Type PB [6-B]

• EN 14126, barrier to infective agents

• Antistatic treatment to EN 1149-1, on both sides

• Wide flange and elastic around neck and face

• Stitched internal seams

• Ultra-low-linting, silicon non-added

Applications

• Pharmaceutical handling

• Chemical protection

• Lead and asbestos abatement and remediation

• General maintenance and operations

• Spray painting and general clean-up

Technical Data

• Fabric: Tyvek®, flash spun HDPE

• Basis weight: 41.5 g/m² (DIN EN ISO 536)

• Melting point: approximately 135°C

• Surface resistance, inside and outside: <2.5 x 10⁹ Ohm (EN 1149-1, 25% RH)

• Type PB 6 partial body protection: pass (EN 13034)

• Seam strength: >50 N (EN ISO 13935-2)

• Resistance to water penetration: >10 kPa (AATCC 127)

• Abrasion resistance: >100 cycles; flex cracking: >100,000 cycles

• Repellency to 10% sodium hydroxide and 30% sulphuric acid: >95% (EN ISO 6530)

Size & Packaging

• One size

• Pack of 100

Unit of Sale

• Pack