Tyvek® 500 Industry Coverall | Type 5/6 | Collared | White

The DuPont™ Tyvek® 500 Industry is a white coverall with a mandarin collar, offering Type 5 and 6 protection. Tyvek® is made from flash spun high density polyethylene, giving a balance of protection, durability and comfort. It is permeable to air and water vapour yet repels water-based liquids and aerosols, offers an excellent barrier against fine particles and fibres down to 1 micron, is ultra-low-linting and antistatically treated on both sides. Silicon non-added. Suitable for use in GMP class C/D (ISO Class 6-9) cleanrooms, and for workers in pharmaceutical, medical device, biotech and electronics settings where particle and microbiological contamination control matters.

Features

• Certified to Regulation (EU) 2016/425

• Chemical protective clothing, Category III, Type 5 and 6

• EN 14126, barrier to infective agents

• EN 1073-2, protection against radioactive contamination

• Antistatic treatment to EN 1149-5, on both sides

• Suitable for use in GMP class C/D (ISO Class 6-9) cleanrooms

• Stitched internal seams to help reduce contamination from inside to outside

• Tyvek® zip and zip flap

• Mandarin collar

• Elasticated wrists and ankles, glued-in waist elastic

• Gusset for improved fit

• Ultra-low-linting, silicon non-added

Applications

• Pharmaceutical and medical device manufacturing

• Biotech and electronics

• Particle and microbiological contamination control

• Industrial cleaning and maintenance

Technical Data

• Fabric: flash spun HDPE

• Basis weight: 41.5 g/m² (DIN EN ISO 536)

• Weight: under 180g per garment

• Melting point: approximately 135°C

• Surface resistance, inside and outside: <2.5 x 10⁹ Ohm (EN 1149-1, 25% RH)

• Type 5 inward leakage: 1.5% (EN ISO 13982-2)

• Type 6 low level spray test: pass (EN ISO 17491-4, Method A)

• Nominal protection factor: >5 (EN 1073-2, class 1/3)

• Seam strength: >75 N (EN ISO 13935-2)

• Resistance to water penetration: >10 kPa (AATCC 127)

• Abrasion resistance: >100 cycles; flex cracking: >100,000 cycles

• Repellency to 10% sodium hydroxide and 30% sulphuric acid: >95% (EN ISO 6530)

Size & Packaging

• Sizes: SM, MD, LG, XL, 2X, 3X

• Individually packed

Unit of Sale

• Supplied individually