Tyvek® 500 Labcoat | Zip, No Pockets | Type PB [6-B] | White

The DuPont™ Tyvek® 500 Labcoat PL309NP is a white labcoat with a collar, zip closure and tunnelled elasticated cuffs. This is the version without pockets, which makes it a better choice where pockets would trap contamination. Seams are stitched internally. Designed for use alongside Tyvek® apparel, Tyvek® accessories give enhanced protection for body parts that are more exposed to hazardous substances. Tyvek® is made from flash spun high density polyethylene, permeable to air and water vapour yet repelling water-based liquids and aerosols, with an excellent barrier against fine particles and fibres down to 1 micron. Ultra-low-linting and antistatically treated on both sides. Silicon non-added.

Features

• Certified to Regulation (EU) 2016/425

• Partial body chemical protective clothing, Category III, Type PB [6-B]

• EN 14126, barrier to infective agents

• Antistatic treatment to EN 1149-1, on both sides

• Collar with zip closure

• Without pockets

• Tunnelled elasticated cuffs

• Stitched internal seams

• Ultra-low-linting, silicon non-added

Applications

• Pharmaceutical handling

• Chemical protection

• Lead and asbestos abatement and remediation

• General maintenance and operations

• Spray painting and general clean-up

Technical Data

• Fabric: Tyvek®, flash spun HDPE

• Basis weight: 41.5 g/m² (DIN EN ISO 536)

• Melting point: approximately 135°C

• Surface resistance, inside and outside: <2.5 x 10⁹ Ohm (EN 1149-1, 25% RH)

• Type PB 6 partial body protection: pass (EN 13034)

• Seam strength: >50 N (EN ISO 13935-2)

• Resistance to water penetration: >10 kPa (AATCC 127)

• Abrasion resistance: >100 cycles; flex cracking: >100,000 cycles

• Repellency to 10% sodium hydroxide and 30% sulphuric acid: >95% (EN ISO 6530)

Size & Packaging

• Sizes: SM, MD, LG, XL, 2X

• Individually packed, 50 per bag, 25 bags per carton

Unit of Sale

• Supplied individually