Tyvek® 500 Labo Coverall | Type 5/6 | Attached Overshoes | White

The DuPont™ Tyvek® 500 Labo is a white hooded coverall with attached, slip-retardant overshoes, offering Type 5 and 6 protection. It has a three-piece respirator fit hood, a gusset for improved fit, tunnelled elastication at the face, wrists and ankles, glued-in waist elastic, and thumb loops to stop the sleeves riding up. Tyvek® is made from flash spun high density polyethylene, permeable to air and water vapour yet repelling water-based liquids and aerosols, with an excellent barrier against fine particles and fibres down to 1 micron. Ultra-low-linting and antistatically treated on both sides. Silicon non-added. Suitable for use in GMP class C/D (ISO Class 6-9) cleanrooms.

Features

• Certified to Regulation (EU) 2016/425

• Chemical protective clothing, Category III, Type 5 and 6

• EN 14126, barrier to infective agents

• EN 1073-2, protection against radioactive contamination, class 2/3

• Antistatic treatment to EN 1149-5, on both sides

• Suitable for use in GMP class C/D (ISO Class 6-9) cleanrooms

• Attached overshoes in garment material with friction-coated sole for added slip-resistance

• Three-piece hood with respirator fit

• Stitched internal seams to help reduce contamination from inside to outside

• Tyvek® zip with pin lock slider and storm flap

• Thumb loops

• Ultra-low-linting, silicon non-added

Applications

• Pharmaceutical industry

• Laboratories

• Cosmetics

• Optical and electronics

Technical Data

• Fabric: flash spun HDPE

• Basis weight: 41.5 g/m² (DIN EN ISO 536)

• Weight: under 250g per garment

• Melting point: approximately 135°C

• Surface resistance, inside and outside: <2.5 x 10⁹ Ohm (EN 1149-1, 25% RH)

• Type 5 inward leakage: 1.5% (EN ISO 13982-2)

• Type 6 low level spray test: pass (EN ISO 17491-4, Method A)

• Nominal protection factor: >50 (EN 1073-2, class 2/3)

• Seam strength: >75 N (EN ISO 13935-2)

• Resistance to water penetration: >10 kPa (AATCC 127)

• Abrasion resistance: >100 cycles; flex cracking: >100,000 cycles

• Repellency to 10% sodium hydroxide and 30% sulphuric acid: >95% (EN ISO 6530)

Size & Packaging

• Sizes: SM, MD, LG, XL, 2X, 3X

• Individually packed

Unit of Sale

• Supplied individually