Tyvek® 500 Shoe Covers | Slip-Retardant Sole | Type PB [6-B] | Pack of 200

The DuPont™ Tyvek® 500 Shoe Cover POSA is a white overshoe with a slip-retardant sole, an elasticated ankle and stitched internal seams, available in two sizes for a better fit than one-size covers. Designed for use alongside Tyvek® apparel, Tyvek® accessories give enhanced protection for body parts that are more exposed to hazardous substances. Tyvek® is made from flash spun high density polyethylene, permeable to air and water vapour yet repelling water-based liquids and aerosols, with an excellent barrier against fine particles and fibres down to 1 micron. Ultra-low-linting and antistatically treated on both sides. Silicon non-added. Also available without the slip-retardant sole.

Features

• Certified to Regulation (EU) 2016/425

• Partial body chemical protective clothing, Category III, Type PB [6-B]

• EN 14126, barrier to infective agents

• Antistatic treatment to EN 1149-1, on both sides

• Slip-retardant sole

• Elasticated ankle

• Stitched internal seams

• Ultra-low-linting, silicon non-added

Applications

• Pharmaceutical handling

• Chemical protection

• Lead and asbestos abatement and remediation

• General maintenance and operations

• Spray painting and general clean-up

Technical Data

• Fabric: Tyvek®, flash spun HDPE

• Basis weight: 41.5 g/m² (DIN EN ISO 536)

• Melting point: approximately 135°C

• Surface resistance, inside and outside: <2.5 x 10⁹ Ohm (EN 1149-1, 25% RH)

• Type PB 6 partial body protection: pass (EN 13034)

• Seam strength: >50 N (EN ISO 13935-2)

• Resistance to water penetration: >10 kPa (AATCC 127)

• Abrasion resistance: >100 cycles; flex cracking: >100,000 cycles

• Repellency to 10% sodium hydroxide and 30% sulphuric acid: >95% (EN ISO 6530)

Size & Packaging

• Sizes: 36-42, 42-46

• Pack of 200

Unit of Sale

• Pack