Tyvek® IsoClean® Cleanroom Chemo Gown – White

DuPont™ Tyvek® IsoClean® chemo gown, part number IC 703S 00, in white. Made of high-density polyethylene using a patented flash spinning process, Tyvek® IsoClean® gives an inherent barrier to particles, microorganisms and non-hazardous water-based liquid splash, with an antistatic treatment applied to both sides. The collared gown fastens with hook and loop at the neck and has knitted cuffs, bound ties at the waist originating from elasticated sides, an increased skirt length for frontal protection and an open back closure for comfort. Supplied neither clean-processed nor gamma-irradiated but manufactured in a controlled environment.

Features

• Suitable for use in GMP class C/D (ISO Class 6+) cleanrooms

• Partial body chemical protective clothing, Category III, Type PB [6-B]

• Certified to Regulation (EU) 2016/425

• EN 14126, barrier to infective agents

• Antistatic treatment to EN 1149-1, applied both sides

• Tyvek® 500 fabric, flash spun HDPE

• Collared gown with hook and loop neck closure

• Knitted cuffs

• Bound ties at the waist originating from elasticated sides

• Increased skirt length for frontal protection

• Open back closure for wearer comfort

• Serged seams

• Manufactured in a controlled environment

• Not clean-processed and not sterilised

Applications

• Handling cytostatics and general laboratory activities

• Cleanrooms in biotech and pharmaceutical manufacturing

• Medical device manufacturing

• Food processing and cosmetics

• Other controlled environments

Technical Data

• Fabric: Tyvek® 500, flash spun HDPE

• Basis weight: 41.5 g/m² (DIN EN ISO 536)

• Surface resistance at 25% RH, inside and outside: <2.5 × 10⁹ Ohm (EN 1149-1)

• Tensile strength MD and XD: >60 N (DIN EN ISO 13934-1)

• Trapezoidal tear resistance MD and XD: >10 N (EN ISO 9073-4)

• Puncture resistance: >10 N (EN 863)

• Seam strength: >30 N (EN ISO 13935-2)

• Abrasion resistance: >100 cycles (EN 530 Method 2)

• Flex cracking resistance: >100,000 cycles (EN ISO 7854 Method B)

• Resistance to water penetration: >10 kPa (AATCC 127)

• Air permeability: <45 s, Gurley (TAPPI T460)

• Repellency to sodium hydroxide 10% and sulphuric acid 30%: >95% (EN ISO 6530)

• Resistance to penetration by those liquids: <1% (EN ISO 6530)

• Melting point: approximately 135°C

• Type PB 6 partial body protection: pass (EN 13034)

Size & Packaging

• SM to 3X (XS made to order)

• Supplied individually, 30 per box

Unit of Sale

• Each